This wall mount enclosure is designed specifically for the Ekrano GX panel. It securely houses the 65 x 120 mm GX display, making it ideal for clean installations in workshops, control rooms, or mobile setups. This accessory enhances usability by allowing easy access to system monitoring without needing to move the device.
Ekrano GX
The Ekrano GX is a fully featured communication centre, built with the latest remote monitoring capabilities. Gain ultimate control with this latest addition to the GX family and feel the power of truly being in charge.
Check real-time data and analysis on your integrated 7-inch touchscreen display, running on the all-new and intuitive Venus OS. The Ekrano GX is a flexible powerhouse that will integrate into any Victron system complete with a range of hardware connectivity to suit every need. It enables you to access and control your system from anywhere, through the Victron Remote Management (VRM) portal and VictronConnect app. Enter a new era of full and dynamic system control with the Ekrano GX.
Phoenix Inverter 24/800 120V VE.Direct NEMA 5-15R
This is a compact inverter/charger designed for off-grid and backup power applications. It delivers 500 VA of continuous power and features a 20 A battery charger for efficient energy replenishment. With VE.Bus communication, it integrates seamlessly into larger Victron Energy systems for remote monitoring and control. The unit supports PowerAssist, helping to boost limited grid or generator power when needed. Its robust design and intelligent features make it ideal for mobile, marine, and residential setups.
Phoenix Inverter 24/250 120V VE.Direct NEMA 5-15R
Phoenix Inverter 12/375 120V VE.Direct NEMA GFCI
GX Tank 140
The GX Tank 140 takes readings from up to four tank level sensors. It is an accessory for our range of GX system monitoring products, of which the Cerbo GX is the most commonly used model.
Tank levels can be read-out locally in the system, see screenshot, as well remotely through our VRM Portal.
The GX Tank 140 is compatible with current senders (4 to 20 mA) as well as voltage senders (0 to 10 V). The connection to the GX Device is via USB, which is also how the GX Tank is powered: no additional power wires required.
Tank sender wiring is kept as simple as possible: two of the four inputs provide a 24 V power supply, to power the sender. The other two channels do require an external power supply, and there is a power in terminal together with fused outputs to facilitate that.
Upper and lower limits are configurable, to allow using senders that provide only part of the scale, for example 0 to 5 V.
To provide a stable reading, the readings are averaged damping. The damping can be configured between 1 and 60 seconds.
Faulty sensors and wiring issues are detected: an alarm will be raised when values are out of range.
For marine applications, the GX Device can transmit these tank levels on the NMEA 2000 network to be picked up by other displays such as an MFD.
This antenna is designed to boost cellular connectivity for Victron GX LTE 4G devices in challenging environments. Its compact, weather-resistant design makes it ideal for marine, RV, and off-grid installations. With a 3-meter cable, it offers flexible mounting options to optimize signal strength.
Insight into your installation is essential for maintaining and operating any off-grid energy system. Off-grid doesn’t have to mean off-line, and that’s where the GlobalLink 520 comes in. This device provides 4G LTE-M connectivity to all VE.Direct enabled Victron components without monthly fees or subscriptions for the first five years
Blue Smart IP67 Charger 12/13(1) 120V NEMA 5-15
The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Smart Battery Sense long range (up to 10m)
Smart Battery Sense is a wireless battery voltage and temperature sensor for Victron MPPT Solar Chargers.
With voltage and temperature sense in place, batteries will be better charged; improving charging-efficiency and prolonging battery life.
Interface MK3-USB-C (VE.Bus to USB-C)
The MK3-USB allows the following products to connect to a computer for configuration and firmware updates:
Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, VE.Bus BMS V2, Inverter/Charger settings in ECOmulti, EasySolar, EasyPlus, and Inverters with a VE.Bus communication port.
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
This SmartSolar Controller is compact and efficient. Designed for 12V and 24V battery systems, it supports up to 75V of PV input and delivers a maximum charge current of 10A; making it ideal for small solar setups. With ultra-fast Maximum Power Point Tracking (MPPT), it maximizes energy harvest even in partially shaded conditions. It’s compatible with lithium, AGM, gel, and flooded batteries, and can be monitored and configured via the VictronConnect app.
This compact solar charge controller supports up to 75V of PV input and delivers a maximum charge current of 15A. It’s ideal for small off-grid systems, including RVs, boats, and cabins. With ultra-fast MPPT technology, it maximizes energy harvest even in shaded or low-light conditions. Bluetooth connectivity allows easy monitoring and configuration via the VictronConnect app.
It also features programmable charge settings, allowing users to fine-tune voltage thresholds and absorption times to match specific battery requirements. This ensures optimal performance and longevity for lithium, AGM, gel, or flooded battery types in diverse solar setups.
This SmartSolar charge controller is designed for efficient solar energy management. It supports 12V, 24V, and 48V battery systems and uses advanced MPPT technology to maximize power harvest from solar panels. Built-in Bluetooth connectivity allows users to monitor and configure settings via the VictronConnect app. Its compact design and reliable performance make it ideal for off-grid and mobile solar installations
SmartSolar MPPT Controller for efficient energy harvest
High efficiency with a maximum charging current of 45A
MC4 connectors for easy and secure panel connection
Optimizes energy harvest for improved overall system performance
Durable construction for long-lasting reliability
For MC4 models: several of the solar charger's MC4 pairs may be needed to parallel solar panel strings. Be aware that the maximum current through a MC4 connection cannot exceed 30A.
Orion-Tr Smart 12/24-15A (360W) Non-isolated DC-DC charger
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch.
The Orion-Tr Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Orion-Tr Smart 24/12-30A (360W) Non-isolated DC-DC charger
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch.
The Orion-Tr Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Orion-Tr Smart 12/12-18A (220W) Isolated DC-DC charger
The Orion-Tr Smart DC-DC charger is an adaptive 3-stage charger (bulk – absorption – float) designed for dual battery systems, such as in vehicles or on boats where the starter battery (hence the alternator) is used to charge the service battery. The name "Smart" comes from its built-in Bluetooth connection, where the charger can be monitored and configured via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. This isolated model allows the input and output to have separate chassis grounds.
The Orion-Tr Smart charger can be used in 12V, 24V or 48V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
The VE.Can to NMEA2000 Micro-C male cable connects Victron Energy devices to NMEA 2000 marine networks for seamless data sharing. It enables real-time monitoring and integration of Victron systems with other onboard electronics like chartplotters and multifunction displays.
Energy Meters are typically used in an Energy Storage System, to measure the power and energy of the entire application at the distribution box and minimises energy import or export to the grid. They can also be used to measure the output of a PV inverter or AC loads and display the data on GX devices such as the Cerbo GX or Ekrano GX and the VRM Portal. Victron VM-3P75CT energy meter (Ethernet and VE.Can - for three-phase and split-phase, uses supplied CTs, max. 80A per phase)
The SolidSwitch 104 will switch DC loads of up to 70V/4A and can be controlled by a low power digital signal.
The DC load can be resistive, capacitive or inductive (such as the coil of a high-power contactor).
The SolidSwitch is not reverse polarity protected and not short circuit proof.
Phoenix Inverter 48/375 120V VE.Direct NEMA 5-15R
Phoenix Inverter 48/800 120V VE.Direct NEMA 5-15R
RuuviTag is a Bluetooth sensor that monitors environmental conditions and sends the data directly to your mobile device. The Ruuvi Station mobile app allows you to view real-time accurate measurements and historical graphs. The app also provides customisable alerts to notify you of critical conditions, such as a melting freezer, excessively high bedroom temperatures that could disrupt sleep, or elevated humidity levels in your basement.
Temperature: °C, °F, K; typical accuracy ±0,2 °C @ 5-60 °C (±0.36 °F @ 41-140 °F).
Air humidity: RH-%, g/m3, dew point; typical accuracy ±3 RH-% @ 20…80 %. Range: 0-95 %.
Air pressure: Pa, hPa, mmHg, inHg; typical accuracy ±1 hPa. Range: 500-1155 hPa.
Motion: Movement counter. Counter is incremented when acceleration exceeds the threshold on any axis.
Operating temperature (with stock battery): -20 °C to +70 °C (-4 °F to 158 °F).
Absolute maximum operating temperature: -40 °C to +85 °C (-40 °F to +185 °F).
Housing: IP67, splash-proof, non-condensing location.
Battery: User-replaceable CR2477 (included). Supports extended operating temperature range battery CR2477T.
Battery lifespan: Estimated 12 to 24 months.
Certifications: CE, FCC, ISED, TELEC, IFETEL, NOM, RTCA DO-160 category H, RoHS, IC, HVIN, IMDA, OFCA, ICASA, POTRAZ.
Bluetooth range: 5-20 meters (indoor), 20-100 meters (outdoor). The sensitivity of the receiving mobile device’s antenna, obstacles and wall materials affect the range. For increased range, use the Ruuvi Gateway router as a receiver.
Ruuvi:RuuviTag Pro Sensor (2in1, waterproof)
Measures temperature, humidity, air pressure and motion. Water protection level: IP67 (tolerates only temporary wet conditions).
RuuviTag Pro monitors environmental conditions and sends the data directly to your mobile device. Ruuvi Station mobile app allows you to view real-time accurate measurements and historical graphs. The app also provides customisable alerts to notify you of critical conditions, such as a melting freezer, excessively high bedroom temperatures that could disrupt sleep, or elevated humidity levels in your basement.
Operating temperature (with stock battery): -40 °C to +85 °C (-40 °F to 185 °F).
Housing (4in1 and 3in1) water protection level: IP67, splash-proof, non-condensing location.
Housing (2in1) water protection level: IP68 & IP69K, hot pressurised spray.
Battery: User-replaceable CR2477T (included).
Battery lifespan: Estimated 12 to 24 months.
Certifications: CE, FCC, ISED, TELEC, IFETEL, NOM, RTCA DO-160 category H, RoHS, IC, HVIN, IMDA, OFCA, ICASA, POTRAZ.
Bluetooth range: 5-20 meters (indoor), 20-100 meters (outdoor). The sensitivity of the receiving mobile device’s antenna, obstacles and wall materials affect the range. For increased range, use the Ruuvi Gateway router as a receiver.
The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set.
Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual).
If required, Bluetooth can be disabled.
The Smart BatteryProtect is a uni-directional device. It can only deal with current in one direction, so either current to a load, or current from a charger, but not both currents at the same time. In addition to this, current only can only flow from the IN terminal to the OUT terminal. In case of use with a load, the battery connects to the IN terminal, and in case of use with a charger, the charger connects to the IN terminal.
The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set.
Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual).
If required, Bluetooth can be disabled.
The Smart BatteryProtect is a uni-directional device. It can only deal with current in one direction, so either current to a load, or current from a charger, but not both currents at the same time. In addition to this, current only can only flow from the IN terminal to the OUT terminal. In case of use with a load, the battery connects to the IN terminal, and in case of use with a charger, the charger connects to the IN terminal.
he Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set.
Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual).
If required, Bluetooth can be disabled.
The Smart BatteryProtect is a uni-directional device. It can only deal with current in one direction, so either current to a load, or current from a charger, but not both currents at the same time. In addition to this, current only can only flow from the IN terminal to the OUT terminal. In case of use with a load, the battery connects to the IN terminal, and in case of use with a charger, the charger connects to the IN terminal.
The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set.
Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual).
If required, Bluetooth can be disabled.
The Smart BatteryProtect is a uni-directional device. It can only deal with current in one direction, so either current to a load, or current from a charger, but not both currents at the same time. In addition to this, current only can only flow from the IN terminal to the OUT terminal. In case of use with a load, the battery connects to the IN terminal, and in case of use with a charger, the charger connects to the IN terminal.
The SmartShunt is an all-in-one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
The Cerbo GX is a flexible communication centre that will take remote monitoring to the next level. With all the hardware connection possibilities to fit your every need.
The Cerbo GX enables you to monitor and control your system from anywhere, at any time. It is designed to be a versatile centrepiece that seamlessly connects to your other Victron connected products and supported third party devices. Master remote systems with real-time monitoring, historical analysis, remote access and control with the Victron Remote Monitoring (VRM) portal and VictronConnect app. Or simply connect a GX Touch display for direct control. With plenty of possibilities, the Cerbo GX puts the power in your hands.
No results match your search. Try removing a few filters.
